Visonicom VRP125 WiFi repeater is a dual band 11AC 2T2R 1200Mbps wireless range extender which can easily increase the WiFi signal coverage of your wireless network for better WiFi connection in homes with many rooms or multiple floors. The Wi-Fi range extender has a built-in 110~240v to DC power adapter so that it can be plugged directly into an electrical outlet for convenient implementation.

The 802.11ac stylish WiFi repeater can also work as a router. The web GUI of the wireless range extender is simple to configure. The power switch of the Wi-Fi extender is convenient to power on/off when necessary.

The 802.11ac WiFi range extender also support mesh mode so that you can use it to set up a mesh network for seamless wireless connection.

This dual band WiFi Repeater is mainly used for providing free WiFi service in large area such as factory, community, street, home or etc. For example, the normal enhancer can expend distance up to 50~100 meters away. If there are more repeaters or more bigger power repeater, the range will be extended further; the WiFi extender simultaneously supports 2.4G and 5G WiFi network connection, and it can support 2.4G or 5G transmission speeds of up to 1200M. It has 2dBi Antennas providing even better wireless performance, transmission rates, stability technology automatically avoids channel conflicts using its channel selection feature.


*Slide Switch: to shift working modes: Repeater, Router, Mesh
*Dual Band: 2.4GHz and 5GHz
*Supports web GUI management and TFTP upgrade
*Signal Indicator helps to find the right location to place the range extender
*Range Extender mode boosts wireless signal to previously unreachable or hard-to wire areas flawlessly
*Compact and wall-mounted design make it easy to deploy and move flexibly
*Provides 10/100Mbps Auto-negotiation Ethernet ports.
*WPS button allows users to set up instantly Smart
*Provides 3 work modes: Repeater mode, Router mode and Mesh Mode
*Encryption: 64/128 bits WEP; WPA/WPA2
*Easy Setup Assistant provides quick & hassle-free installation.
*WLAN access point/client according to IEEE 802.11ac/n/g/b. 


Hardware Parameters
Chipset RTL8197FH-VG4-cg +8812FR 
CPU Frequency Single core 1GHz
Memory 64MB 16-bit DDR2 SDRAM
Flash 8MB
WiFi 2T2R 2.4GHz 802.11b/g/n,  300Mbps
2T2R 5.8GHz 802.11AC,  867Mbps
Interface 1*RJ45 10M/100M Ethernet Interfaces 
1*WPS/Reset Button
1*Slide Switch for 3 Working Modes Selection(Router/AP/Repeater)
1*Input 100-240V~50/60Hz
WiFi Antenna 2*3dBi External 2.4G Antenna
2*3dBi External 5.8G Antenna
WiFi Features
Standard 802.11b/g/n/ac
11N: 2.4~2.4835GHz
11AC: 5.150~5.825GHz
Korea,  Japan,  ETSI,  FCC Channel Options
Modulation Schemes OFDM: BPSK, QPSK,  16-QAM,  64-QAM 256-QAM
Transfer Rate HT20: Up to 144 Mbps
HT40: Up to 300 Mbps
VHT80: Up to 867Mbps
Software Features
General RFC0768 UDP
RFC0791 IP
RFC0826 Ethernet ARP
RFC0894 IP over Ethernet
RFC0922 Broadcasting Internet Datagrams
RFC0950 Internet Standard Subnetting
IEEE802.3 Ethertype
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n
RFC2516 PPP Over Ethernet (PPPoE)
RFC1662 PPP in HDLC-like Framing
RFC1332 PPP Internet Protocol Control Protocol
RFC1042 A standard for the Transmission of IP Datagrams over IEEE 802 Networks
IPoE (a.k.a IP over Ethernet over AAL5)
DHCP Server,  Client
DMZ and Port Forwarding (Virtual Server)
IGMP Proxy and MLD for IPTV
Logs and Statistics
Flexible and Secure SPI Firewall,  Denial of Service (DoS) Protection
Port Filtering,  IP Filtering and MAC Filtering 
URL Filter
QOS Flow Control
Static Route
SNTP Date/time Update from Internet Time Server
Wireless Site Survey
Wireless ACL
Separate Authentication for Each SSID
Wireless Schedule
802.11q vLAN
Ping Diagnostics and TraceRoute Diagnostics 
Router/AP/Repeater Modes
Environment Requirement
Operating Temperature 0°C~40°C
Storage Temperature -20°C ~ 90°C
Operating Humidity 5%~95% (typical)
Regulation Compliance CE
Safety Regulations UL
Green Standard RoHS